Industrial Epoxy Coatings
Elite Crete Systems is recognized as the most well known name in the decorative concrete industry. As the industry leader in manufacturing research and development of decorative concrete based products, it is easy to forget that we are also one of the largest manufacturers and formulators of industrial epoxy coatings as well.
Most companies claiming to be a manufacturer or formulator of epoxy products, actually purchase their products from true manufacturers and simply repackage or re-label the containers.
Elite Crete Systems began manufacturing epoxies and urethanes for industrial and commercial floor coatings nearly 20 years ago. Although our introduction to the industry started off slow we began to see an increased need for properly formulated, durable epoxy coatings.
In 2008 we made a significant investment in a brand new, state of the art manufacturing and testing facility to improve our epoxy coatings line. Part of the investment was a new Morehouse Cowles high speed dissolver that increased our production capability by 700%.
In addition to the "Key Products" listed on the right, we have additional epoxy products that we simply do not and will not list on our website.
For additional information about all of our industrial epoxy products, visit the Documents and Technical Data Section.
REFLECTOR™ Enhancer Flooring Systems used in conjustion with our industrial epoxy products.
Brochure:
Do you receive our newsletters yet? Sign up today and receive monthly information on new products, training locations, free giveaways and more.
| Add your email address to sign up today |
Key Products
E100-PT1™ Crystal Clear Epoxy:
A true 100% solids clear epoxy formulated with three objectives in mind: Durability, Ease of Use and Cost Effectiveness.
For additional information and documentation about E100-PT1™ Crystal Clear Epoxy, visit Documents and Technical Data page.
The photo above is of a 19,000 sq. ft. designer kitchen and bath retailer. The products use were CHEM-STONE™ and E100-PT1™.
E100-PT4™ Pigmented Epoxy Coating:
Very similar to E100-PT1™ in terms of 100% solids, ultra durable, ease to apply and extremely cost effective yet formulated to compensate for typical strength losses due to color content.
For additional information and documentation about E100-PT4™ Pigmented Epoxy Coating, visit Documents and Technical Data page.
The photos above are of a 38,000 sq. ft. Honda dealership service area. The products use were E100-VB5™, E100-PT4™ and E100-PT1™.
E100-PT3™ Water Clear Epoxy:
A clear, waterborne epoxy that exhibits exceptional strength characteristics compared to other non 100% solids epoxies.
For additional information and documentation about E100-PT3™ Waterborne Clear Epoxy, visit Documents and Technical Data page.
The photo above is of a 500 sq. ft. residential garage floor. The products use were E100-VB5™, E100-PT4™ and E100-PT1™.
E100-NV4™ Novolac Epoxy:
A 100% solids, chemical resistant epoxy coating designed for areas subject to chemical contamination.
For additional information and documentation about E100-NV4™ Novolac Epoxy, visit Documents and Technical Data page.
The photos above are of a 96,000 sq. ft. Kimberley Clark manufacturing facility. The products use were E100-PT4™ and E100-PT1™.
E100-NV5™ Super Duty Novolac Epoxy:
Similar to E100-NV4™ but formulated to have a much higher chemical resistance.
For additional information and documentation about E100-NV5™ Super Duty Novolac Epoxy, visit Documents and Technical Data page.
The photo above is of a 15,000 sq. ft. at an NCAA basketball arena. The product use was E100-PT1™.